Name Of Our Products Items

      Technical Details

Hydrant_valve Single Headed Hydrant Valve
Type-A 63 mm Fire Hydrant valve conforming to IS: 5290.
MOC are Two types i) G.M. (IS: 318, LTB – II ) & ii) S.S. ( IS: 3444, Gr. – I ). Each Valve is tested as per the BIS testing norms. The valves are tested by two routine tests and one type test. Routine tests are a) Water tightness test done at 14 Kgf/cm² for 2 ½ minutes, b) Hydraulic Pressure test done at 21 Kgf/cm² for 2 ½ minutes. & the type test is Flow test done 900 LPM at 7 Kgf/cm² for 1 minute. Hydrant valve has one base flange on minimum 12 mm thick. There are 4 numbers holes each of which is 19 mm diameter to connect at water-line. 150 mm Wheel is at the top of the valve to open or close the valve during operation. The 63 mm oblique outlet is present to deliver the water.
Coupling Male Female Coupling
63mm. & 70mm. O.D. – 63mm. & I.D. – 53mm.
conforming to IS: 903.
MOC are Two types i) G.M. (IS: 318, LTB – II ) & ii) S.S. ( IS: 3444, Gr. – I ). Each Coupling is tested as per IS testing norms. The Couplings are hydraulically tested at 21 Kgf/cm² for 2 ½ minutes. The end connections of both Male & Female Couplings are bounded with Delivery Hose.
jet-nozzle Branch Pipe with Jet Nozzle
Length – 200mm. ( min. ), Nozzle – 100 ± 1 Nozzle Bore Size – 6, 12,15,
20,25&30mm. Conforming to IS: 903.

MOC are Two types i) G.M. (IS: 318, LTB – II ) & ii) S.S. ( IS: 3444, Gr. – I ). Each Branch Pipe is tested as per BIS testing norms. Each Branch Pipe are hydraulically tested @ 21 Kgf/cm² for 2 ½ minutes. The end connections of Branch Pipe will connect with Female part of coupling.
universal-branch-pipe Universal Branch Pipe
Length 254 ( max. Overall ).As per IS: 2871.
MOC are Two types i) G.M. (IS: 318, LTB – II ) & ii) S.S. ( IS: 3444, Gr. – I ). Each Universal Branch Pipe is tested as per BIS testing norms. The Universal Branch Pipe Body are tested hydraulically @ 21 Kgf/cm² for 2 ½ minutes. The end connections of Universal Branch Pipe will connect with Female part of coupling.
fog-nozzle Fog Nozzle
Inlet – 54mm. Outlet – 16mm. and Length – 210 mm. ( min ) As per IS: 952.
MOC are Two types i) G.M. (IS: 318, LTB – II ). Fog Nozzle is a type of hand controlled branch can apply water in the form of either a fog or a jet. Each Fog Nozzle is tested as per IS testing norms. The Fog Nozzle head of the Fog Nozzle shall have a flow not less than 225 LPM at a pressure of 7 kgf/cm² and Jet head of Fog Nozzle shall have a flow not less than 400 LPM at a pressure of 7 kgf/cm². The end connections of Fog Nozzle will connect with Female part of coupling.
fire-box Hose Box ( Type – I & II )
500X600X250mm. or As per customer’s Data Sheet.
(M.S. & FRP ).The Hose Box is for accommodating 1 No of Fire Hose and Branch pipe or 1 No of Universal Branch Pipe

Hose Box ( Type – II ) 750X600X250mm. or As per customer’s Data Sheet. ( M.S. & FRP ). The Hose Box is for accommodating 2 Nos of Fire Hose and Branch pipe or 2 Nos of Universal Branch Pipe/Universal Branch Pipe. The structural support will provide for outdoor installation (As per customer requirement)
double-headed Double Headed Stand Post for Hydrant Valve
As per customer’s Data Sheet.
Go Top